# Sample configuration file for smartd. See man smartd.conf.
# Home page is: http://www.smartmontools.org
# $Id: smartd.conf 4120 2015-08-27 16:12:21Z samm2 $
# smartd will re-read the configuration file if it receives a HUP
# signal
# The file gives a list of devices to monitor using smartd, with one
# device per line. Text after a hash (#) is ignored, and you may use
# spaces and tabs for white space. You may use '\' to continue lines.
# You can usually identify which hard disks are on your system by
# looking in /proc/ide and in /proc/scsi.
# The word DEVICESCAN will cause any remaining lines in this
# configuration file to be ignored: it tells smartd to scan for all
# ATA and SCSI devices. DEVICESCAN may be followed by any of the
# Directives listed below, which will be applied to all devices that
# are found. Most users should comment out DEVICESCAN and explicitly
# list the devices that they wish to monitor.
DEVICESCAN -H -m root -M exec /usr/libexec/smartmontools/smartdnotify -n standby,10,q
# Alternative setting to ignore temperature and power-on hours reports
# in syslog.
#DEVICESCAN -I 194 -I 231 -I 9
# Alternative setting to report more useful raw temperature in syslog.
#DEVICESCAN -R 194 -R 231 -I 9
# Alternative setting to report raw temperature changes >= 5 Celsius
# and min/max temperatures.
#DEVICESCAN -I 194 -I 231 -I 9 -W 5
# First ATA/SATA or SCSI/SAS disk. Monitor all attributes, enable
# automatic online data collection, automatic Attribute autosave, and
# start a short self-test every day between 2-3am, and a long self test
# Saturdays between 3-4am.
#/dev/sda -a -o on -S on -s (S/../.././02|L/../../6/03)
# Monitor SMART status, ATA Error Log, Self-test log, and track
# changes in all attributes except for attribute 194
#/dev/sdb -H -l error -l selftest -t -I 194
# Monitor all attributes except normalized Temperature (usually 194),
# but track Temperature changes >= 4 Celsius, report Temperatures
# >= 45 Celsius and changes in Raw value of Reallocated_Sector_Ct (5).
# Send mail on SMART failures or when Temperature is >= 55 Celsius.
#/dev/sdc -a -I 194 -W 4,45,55 -R 5 -m admin@example.com
# An ATA disk may appear as a SCSI device to the OS. If a SCSI to
# ATA Translation (SAT) layer is between the OS and the device then
# this can be flagged with the '-d sat' option. This situation may
# become common with SATA disks in SAS and FC environments.
# /dev/sda -a -d sat
# A very silent check. Only report SMART health status if it fails
# But send an email in this case
#/dev/sdc -H -C 0 -U 0 -m admin@example.com
# First two SCSI disks. This will monitor everything that smartd can
# monitor. Start extended self-tests Wednesdays between 6-7pm and
# Sundays between 1-2 am
#/dev/sda -d scsi -s L/../../3/18
#/dev/sdb -d scsi -s L/../../7/01
# Monitor 4 ATA disks connected to a 3ware 6/7/8000 controller which uses
# the 3w-xxxx driver. Start long self-tests Sundays between 1-2, 2-3, 3-4,
# and 4-5 am.
# NOTE: starting with the Linux 2.6 kernel series, the /dev/sdX interface
# is DEPRECATED. Use the /dev/tweN character device interface instead.
# For example /dev/twe0, /dev/twe1, and so on.
#/dev/sdc -d 3ware,0 -a -s L/../../7/01
#/dev/sdc -d 3ware,1 -a -s L/../../7/02
#/dev/sdc -d 3ware,2 -a -s L/../../7/03
#/dev/sdc -d 3ware,3 -a -s L/../../7/04
# Monitor 2 ATA disks connected to a 3ware 9000 controller which
# uses the 3w-9xxx driver (Linux, FreeBSD). Start long self-tests Tuesdays
# between 1-2 and 3-4 am.
#/dev/twa0 -d 3ware,0 -a -s L/../../2/01
#/dev/twa0 -d 3ware,1 -a -s L/../../2/03
# Monitor 2 SATA (not SAS) disks connected to a 3ware 9000 controller which
# uses the 3w-sas driver (Linux). Start long self-tests Tuesdays
# between 1-2 and 3-4 am.
# On FreeBSD /dev/tws0 should be used instead
#/dev/twl0 -d 3ware,0 -a -s L/../../2/01
#/dev/twl0 -d 3ware,1 -a -s L/../../2/03
# Same as above for Windows. Option '-d 3ware,N' is not necessary,
# disk (port) number is specified in device name.
# NOTE: On Windows, DEVICESCAN works also for 3ware controllers.
#/dev/hdc,0 -a -s L/../../2/01
#/dev/hdc,1 -a -s L/../../2/03
# Monitor 3 ATA disks directly connected to a HighPoint RocketRAID. Start long
# self-tests Sundays between 1-2, 2-3, and 3-4 am.
#/dev/sdd -d hpt,1/1 -a -s L/../../7/01
#/dev/sdd -d hpt,1/2 -a -s L/../../7/02
#/dev/sdd -d hpt,1/3 -a -s L/../../7/03
# Monitor 2 ATA disks connected to the same PMPort which connected to the
# HighPoint RocketRAID. Start long self-tests Tuesdays between 1-2 and 3-4 am
#/dev/sdd -d hpt,1/4/1 -a -s L/../../2/01
#/dev/sdd -d hpt,1/4/2 -a -s L/../../2/03
# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE.
# PLEASE SEE THE smartd.conf MAN PAGE FOR DETAILS
#
# -d TYPE Set the device type: ata, scsi, marvell, removable, 3ware,N, hpt,L/M/N
# -T TYPE set the tolerance to one of: normal, permissive
# -o VAL Enable/disable automatic offline tests (on/off)
# -S VAL Enable/disable attribute autosave (on/off)
# -n MODE No check. MODE is one of: never, sleep, standby, idle
# -H Monitor SMART Health Status, report if failed
# -l TYPE Monitor SMART log. Type is one of: error, selftest
# -f Monitor for failure of any 'Usage' Attributes
# -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f
# -M TYPE Modify email warning behavior (see man page)
# -s REGE Start self-test when type/date matches regular expression (see man page)
# -p Report changes in 'Prefailure' Normalized Attributes
# -u Report changes in 'Usage' Normalized Attributes
# -t Equivalent to -p and -u Directives
# -r ID Also report Raw values of Attribute ID with -p, -u or -t
# -R ID Track changes in Attribute ID Raw value with -p, -u or -t
# -i ID Ignore Attribute ID for -f Directive
# -I ID Ignore Attribute ID for -p, -u or -t Directive
# -C ID Report if Current Pending Sector count non-zero
# -U ID Report if Offline Uncorrectable count non-zero
# -W D,I,C Monitor Temperature D)ifference, I)nformal limit, C)ritical limit
# -v N,ST Modifies labeling of Attribute N (see man page)
# -a Default: equivalent to -H -f -t -l error -l selftest -C 197 -U 198
# -F TYPE Use firmware bug workaround. Type is one of: none, samsung
# -P TYPE Drive-specific presets: use, ignore, show, showall
# # Comment: text after a hash sign is ignored
# \ Line continuation character
# Attribute ID is a decimal integer 1 <= ID <= 255
# except for -C and -U, where ID = 0 turns them off.
# All but -d, -m and -M Directives are only implemented for ATA devices
#
# If the test string DEVICESCAN is the first uncommented text
# then smartd will scan for devices.
# DEVICESCAN may be followed by any desired Directives.
I am a small town Minnesota single mom of two great kids who are my life. I began modeling 3 years ago for a photographer ho saw something in me I never did. Ice told me I should do one shoot with him and let that be the guide. I reluctantly agreed, and scheduled our date. I was sacred to death when he told me we would be doing a remake of the publicity stills of the 1956 movie Bus Stop, staring Marilyn Monroe. How in the world could I halfway resemble or pull off an icon the likes of Marylin Monroe in my first step in front of camera? Well, 2 hours later we had a nice set of images and I've been hooked ever since. We've done some really cool things and are looking hard at the future ahead to expand and get me out there a little more.
My pinup journey started at the age of 13 when I started collecting vintage decor and clothing- it has since spiraled into doing pinup shoots, meeting and developing friendships with other gorgeous pinups and being published in a pinup blog and magazine. Looking forward to the future and to see where other opportunities will take me!
Full Bio
I started getting into collecting vintage when I was a young kid, my mom would always take me into antique stores and this seemed to be what fueled it all. Eventually I started dressing and collecting vintage clothing and home decor. My apartment is now a great mix of MCM. I’ve done several pinup photoshoots and am looking to doing more in the future. I have been featured in a online pinup blog as well as being published in an state content creators magazine. Looking forward to the future and all the adventures it brings going forward.
Meet Belle Starr, your favorite tattooed 💉, curvy 💃 nurse turning heads and stealing hearts 💘 across Northwest Florida. A professional nurse 👩⚕️ during the week and a sultry pinup queen 👑 on the weekends, she’s the ultimate blend of classy ✨ and sassy 🔥—a vintage vixen with a modern twist.
Full Bio
Meet Belle Starr, your favorite tattooed 💉, curvy 💃 nurse turning heads and stealing hearts 💘 across Northwest Florida. A professional nurse 👩⚕️ during the week and a sultry pinup queen 👑 on the weekends, she’s the ultimate blend of classy ✨ and sassy 🔥—a vintage vixen with a modern twist.
She serves as the secretary for Pinups and Pumps Florida Chapter 💄 and is the official correspondent for PinupDatabase.com 🖋️. Belle Starr is dedicated to empowering women 👠, spotlighting the pinup community, and keeping the spirit of pinup history alive 📸. When she’s not hostessing 🎤 or interviewing at events 🌟, she’s a fierce advocate for the Ostel Place Foundation 🐴🐶🌿, a charity that helps people heal through horses, puppies, and the beauty of nature.
Whether she’s inspiring women 💋, enticing men 🕶️, or stealing the show as an event hostess 🎉, Belle Starr proves that beauty 💎, brains 🧠, and curves 🔥 never go out of style. Follow her journey for a dose of entertainment 🎭, empowerment 💪, and unforgettable vibes 🌟.
I'm a Pin Up model, classic car lover and Patriot. Been in Pin Up since 2014.
Full Bio
BoomBoom Bettie has been in the pinup world since 2014. She has participated in pageants in person and online since 2019. She loves the title of Favorite Pearl that she received. She is the founder of a Pin Up club called Black Sheep Pin Up Social Club in Arizona. She loves being a part of the pin up world and the sisterhood it creates. She loves to attend local car shows and Pin Up events.
𝑰 𝒑𝒐𝒔𝒕 my own pics, 𝒂𝒍𝒍 𝒄𝒍𝒂𝒔𝒔𝒚, 𝒖𝒔𝒖𝒂𝒍𝒍𝒚 𝒘𝒊𝒕𝒉 𝒇𝒖𝒏 𝒕𝒉𝒆𝒎𝒆𝒔. 𝑪𝒖𝒔𝒕𝒐𝒎 𝒘𝒐𝒓𝒌 𝒊𝒔 𝒂𝒗𝒂𝒊𝒍𝒂𝒃𝒍𝒆.
Jill of All, Owner of 5.
@currentteevents philanthropic tshirts
@shopcadesigns jewelry
@ciaraandruby dog models
@openmybar bar consulting
@calishamrock art/photography
My awesome journey began in California, followed by 25 wonderful years in Colorado. In 2019 I made the best choice of my life—moving to Florida, where I’ve truly found my home. The pin up community has been amazing, as I have always been drawn to the vibrant world of rockabilly style, classic cars, and music. Known for being kind, generous, and full of adventure, I cherish my experiences and connecting with new people. As a proud member of "Pinups and Pumps," I deeply appreciate the camaraderie with my sisters. Together, we give back through charity events, creating lasting bonds and memories.
Rating (average)
(0)
City
St. Augustine
Province
FL
Pin Up Group Membership
Pinups and Pumps Florida
Published in the Following Publications
Dream Beauty, Dream Pinup, Wonderland, Social Pin, Smitten Kitten, Dollface Digest, Crowns & Chrome, Drive In and many more
Clarice entered the pinup scene officially in 2019. Her first photoshoot was a tribute to the queen herself, Bettie Page. Dawning the same iconic bangs and hair darker than the devil's soul, she was a tattooed dead ringer. That photoshoot was featured in Retro Lovely's Bettie Page issue in 2019.
6 years later Clarice is a style of her own, finding herself more and more every day. She's a mental health advocate, constantly trying to educate about mental illness to help end the stigma. In March of this year she'll be celebrating 3 years free from alcohol. Supporting sobriety amongst her community is also a passion. Clarice is also Autistic, and tries to educate on hidden disabilities. Not only is she a pinup, she's a mommy first. Having 3 biological children, 3 "step"children, and her youngest being adopted, who's also autistic.
She enjoys creating art through painting, drawing, photography, and floral hair pieces.
Find her at the car shows, especially if there are rat rods and lowriders involved. Lowriders have been a part of her heart since high school. From being in a friend's hopper getting Taco Bell past her curfew, or cruising the beach with the systems bumping.
The name Clarice Von Darling is a tribute to The Silence of the Lambs. In her sister's memory.
62 year old trans woman who is now retired and living life to the fullest. Many past careers including dairy farmer firefighter/emt truck driver school bus driver church sexton cemetery sexton Public works director juice company truck driver and over the road truck driver. Two grown adult children ages 36 and 33 Two grand children ages 14 and 4 Local church member